Код ошибки 153 hik connect

Код ошибки Hikvision 153 (как исправить)

Код ошибки Hikvision 153 (как исправить)

Код ошибки Hikvision 153 возникает, когда слишком много попыток войти в камеру или видеорегистратор с использованием неверного пароля в мобильном приложении iVMS-4500. Для решения проблемы просто перезагрузите устройство или подождите 30 минут.

Что вызывает код ошибки 153

Когда устройство получает слишком много запросов с неправильным паролем, на экране iVMS-4500 появляется ошибка 153 (см. Рисунок ниже).

Иногда пароль неправильно вводится в мобильный телефон, и приложение отправляет его на устройство более одного раза, что приводит к ошибке и блокирует камеру на некоторое время для защиты от хакерской атаки.

Как исправить ошибку 153

Есть разные способы решить проблему с этой ошибкой:

1. Перезагрузите устройство

Решение этой ошибки очень простое: просто исправьте пароль в iVMS-4500 и перезагрузите камеру или видеорегистратор, выключив и снова включив его.

2. Подожди немного

Вы также можете решить проблему с кодом ошибки 153, просто подождав некоторое время, пока камера снова будет готова, чтобы приложение снова могло аутентифицироваться.

Камера блокируется на 30 минут, а затем возвращается в нормальное состояние.

3. Доступ к устройству с компьютера

Это может быть кто-то другой, пытающийся получить доступ к вашей камере или рекордеру, просто отправив другую комбинацию имени пользователя и пароля.

Камера или видеорегистратор заблокировались на 30 минут, чтобы предотвратить возникновение подобного рода ситуаций, которые могут вызвать проблемы, поэтому проверьте безопасность своей сети.

Код ошибки 153 в других устройствах

Hikvision продает свои продукты другим компаниям, которые перепродают их под другим брендом (OEM-продукты), поэтому иногда такая же проблема с кодом ошибки 153 появляется в других камерах.

Как исправить проблему в камерах LTC

Чтобы исправить код ошибки 153 в камерах LTC, перейдите на вкладку конфигурации « Служба безопасности» и снимите флажок « Включить блокировку нелегального входа ».

Если ваша LTC-камера представляет эту проблему, рекомендуется обновить прошивку, потому что эта проблема обычно возникает со старой прошивкой.

Заключение

Если понравилась статья поделитесь в социальных сетях, кликнув по иконкам ниже

Hikvision error code 153 (how to fix)

The Hikvision error code 153 occurs when there are too many attempts to login into the camera or DVR by using the wrong password in the iVMS-4500 mobile App. To solve the problem just reset the device or wait for 30 minutes.

What causes the error code 153

When the device receives too many requests with the wrong password the error 153 shows up in the iVMS-4500 screen (see the picture below).

Hikvision error code 153

Sometimes the password is incorrectly typed into the mobile phone and the App sends it to the device more than once and that generate an error and lock the camera for some time to protect against a hacker attack.

How to fix the error 153

There are different ways to solve the problem with this error:

1. Reboot the device

The solution for this error is very simple, just correct the password in the iVMS-4500 and reboot the camera or DVR by turning it off and back on.

2. Wait for sometime

You can also solve the error code 153 problem just by waiting some time until the camera is ready again to let the App authenticate again.

The camera is locked for about 30 minutes and then come back to normal.

3. Access the device from a computer

Security concern

Perhaps you are using the correct username and password but for some reason, the iVMS-4500 App is still showing the error code 153 very often.

That could be somebody else trying access your camera or recorder by just sending a different combination of username and password.

The camera or DVR locked itself for 30 min to prevent this type of situation and that can cause a problem for you, so check your network security.

The error code 153 in other devices

Hikvision sells its products for other companies that resell them with a different brand (OEM products), so sometimes the same problem with the error code 153 shows up in other cameras.

A good example is with the LTC cameras that use Hikvision hardware and the same error occurs and it’s not possible to login into the camera.

How to fix the problem in LTC cameras

To fix the error code 153 in the LTC cameras go to the «security service» configuration tab and uncheck the box «Enable Illegal Login Lock«.

If your LTC camera is presenting this issue is recommended to upgrade the firmware because this problem usually occurs with old firmware.

Conclusion

The error code 153 is a problem that is simple to fix but it’s important to upgrade the firmware in the camera or recorder and also make sure you are using the last version of the iVMS-4500 App.

If you want to become a professional CCTV installer or designer, take a look at the material available in the blog. Just click the links below:

Please share this information with your friends.

Claudemir Martins is a former Samsung Engineer with 18+ experience in the surveillance industry. He has been traveling around 17 different countries to teach people how to design, and install CCTV systems. He is currently working for Axis Communications as a Technical Support Engineer and living in the United States with his family.

Источники:

https://security59.ru/a231614-kod-oshibki-hikvision. html

https://learncctv. com/hikvision-error-code-153-solved/

Понравилась статья? Поделиться с друзьями:
Добавить комментарий

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: